How to fix insulation on uneven walls

Laying insulation on the walls is a procedure that allows you to noticeably improve living conditions. After all, due to it, it is possible to stop heat loss. But the situations in which thermal insulation works are carried out are seriously different. Sometimes the heat insulator has to be laid on a surface that has noticeable irregularities. What to do in this case? Below is a suitable technology.

1. The choice of the method of fixing the insulation

There are several ways to fix the insulation. Often owners choose the adhesive method or fixing on dowels. The problem is that it is almost impossible to reliably glue or grab a heat insulator with dowels to an uneven wall. Because of this, it is better to use the third approach: lay the thermal insulation material on a crate or frame.

2. Installation of a frame structure for insulation

In this case, it is not necessary to prepare a rough surface. You can not even remove the old finish, if paint, wallpaper or thin soft tiles act as its role. But ceramic tiles or wall panels must be removed.

The frame is assembled using simple wooden bars. Their thickness should not be less than the thickness of the thermal insulation panels. Usually there are enough bars of about 10 cm . First of all, the perimeter of the wall is sheathed with bars, so that in the end a closed binding is obtained.

Then vertical racks are installed from the same timber. The distance between the racks should be slightly less than the width of the insulation plates. And they do not need to be fixed in increments of more than 80 cm. Otherwise, it will not be possible to get a reliable finish in the future. In some places, you can also fix jumpers, but this is not necessary.

3. Laying of thermal insulation material

The insulation plates should enter between the elements of the frame very tightly, if the owner has correctly chosen the step of the arrangement of the timber racks. There should be no gaps between the slabs themselves, which are laid in one span. For greater reliability, it is better to fasten the edges together using a mounting tape. If the insulation is still held loosely, you should also grab it to the beam with metal brackets.

4. Further repair work

With further finishing measures, a rough skin is first formed. It can be done using drywall or wood slabs. Then decorative material is laid on them. But there is another option: immediately use facing panels that are mounted directly on the frame. You can find here Australian australian mobile casinos best real money pokies